Preparation – Ensure the Masking Master’s application surface is smooth, devoid of protrusions, dry, and free from dust or grease.

Application – Push the Masking Master towards endpoints without pressing on the tape to minimize friction and physical strain.

Post-application – Use a spatula instead of fingers to:

• Prevent surface contamination that hampers paint or sealant adhesion.
• Thoroughly seal the edges of the masking tape, preventing paint seepage.

Distance – Set the masking tape distance (1, 3, or 5mm) equal to or more than existing paint or sealant edges to prevent short tape ends.

Tape Width – Opt for a tape width that is equal to or less than the width of the object being masked to avoid unilateral tape stretching.

Tape Looping – Ensure the tape lies inside both 1mm “ears” on the Masking Master’s filling side (the reference side).

Maintenance and Safety 

• Regularly clean the blades with a solvent.
• Wear safety gloves during blade changes.
• Store in a dry place, away from heat sources, and out of children’s reach.
• Ensure stability of your standing surface during use.
• Keep electronics away from the magnetic parts.
• Securely dispose of used blades.
• Conduct pre-use inspections.

Intended Use

• Use only for its designated purpose.
• Lending is discouraged; you might not retrieve it!